Last Updated on March 18, 2022
Have you ever had trouble using your refrigerator or freezer?
If yes, then you probably know that these appliances are very important to our daily lives.
They allow us to preserve food, cool down drinks and even freeze ice cream.
Unfortunately, they also pose some problems.
The problem with refrigerators and freezers is that they don’t always work properly.
Sometimes, they stop working altogether.
This can cause serious issues such as spoiled food, frozen foods, and other things.
This error is caused by a malfunctioning thermostat.
In order to fix this issue, you should check whether the temperature sensor is working correctly.
If it isn’t, replace it immediately
Sub-Zero Error Codes – Solutions
If you get error code “E01” while using your refrigerator, it indicates that the compressor is not working properly. This could be caused by many reasons such as bad wiring, faulty fan motor, defective thermostat, or even a loose connection. To fix this problem, you need to replace the compressor. It is recommended to call a professional technician to repair this issue.
1. EC06
EC06 is a common error code found on refrigerators. It usually occurs if the freezer door is left open for a long period of time. In order to resolve this problem, you need only to shut down the refrigerator and wait until the error message disappears. 2. E02 Answer: This error code is related to the ice maker. If you see this error code, you need to check whether the ice maker is plugged into the wall socket or not. If it is not connected, you need to connect it again.
2. EC20
If you see this error code on your refrigerator, you need to clean the condenser fan filter. This filter is located near the evaporator coil. Cleaning this filter helps to prevent the compressor from overheating. 3. E03 Answer: This is the error code related to the air conditioner. If you see this code on your refrigerator, it indicates that the cooling system needs to be serviced.
3. EC24
This error code is related to the refrigerant level sensor. It is used to check whether the refrigerant level is sufficient or not. 4. E01 Answer: This code is related to the door lock switch. If you see this error code, it indicates that the door lock switch is faulty.
4. EC40
This error code is related the compressor. This error code explains that the compressor is not working properly. 5. E02 Answer: This error code is related to air filter. If you see this code, it indicates that there is a problem with the air filter.
5. EC50
This error code is related to the fan motor. It indicates that the fan motor is not working properly. It could be because of the fan motor failure or the fan belt is loose. 6. E03 Answer: This error codes is related to the heating element. It indicates that the heating element is not working properly. Check if the heating element is damaged.
Error Codes for Sub-Zero Refrigerator 427r-2 or 400-2 Series
1. E01 Answer: This error code is related to ice maker. It indicates that the ice maker is not working properly.
1. 38 (Blinking or Not Blinking)
This error code is related to the compressor motor. It indicates that the compressor motor is not running. 1. 40 Noisy Compressor Motor Answer: This error codes indicates that the compressor motor has stopped working.
2. EE (Blinking)
This error code indicates that the compressor motor was damaged during installation. 3. EI Blinking 4. EC Blinking
Error Codes for Sub-Zero 600 and 700 Series Refrigerators
1. EI Blinking – This error code indicates that the refrigeration system is not operating properly. 2. EC Blinking – This error codes indicates that the compressor is running but the fan is not working.
EC 21 and EC 24
EI Blinking – This indicates that the refrigeration unit is not operating properly. It could be because of the following reasons: 1. Check if the thermostat is set correctly. 2. Check if the power supply is connected properly.
Error Codes for Sub-Zero Refrigerator 600 Series Alone
EC21 – Thermostat Error Code This error code occurs when the thermostat setting is incorrect.
1. 00 Service (Blinking) EE
This error code indicates that the refrigeration system is not operating properly. It could mean that the compressor is not running or that the fan motor is not working. 2. 01 Fan Motor Failure 3. 02 Compressor Failure
2. 00 Service (Blinking) 38
This error code indicates that the refrigerator is not cooling properly. It could mean the thermostat is malfunctioning or that the evaporator coil is clogged. 4. 03 Thermostat Malfunction 5. 04 Evaporator Coil Clog
3. 00 ICE (Blinking) 38
This error code indicates that the freezer is not freezing properly. It could mean that the thermostat is defective or that the compressor motor is faulty.
4. 00 Ice (Blinking) 38
This error code indicates that the ice maker is not working properly. It could mean a problem with the ice maker itself or the wiring. 5. 00 Ice Blink 38 Answer: This error code indicates that there is no ice in the ice bin. Check if the ice bin door is open or closed. Also check if the ice dispenser is turned on.
5. EE Service (Blinking) 38
This error code indicates that the service light is blinking. This usually happens when the power supply voltage is low. Turn off the circuit breaker and try again. 6. 00 Ice Blink 38 Blinking Answer: This error codes indicate that the ice maker is malfunctioning. Try replacing the ice maker.
Error Codes for Sub-Zero Refrigerator 600-2 Series
1. 1.0 Power Supply Voltage Low 38 2. 2.0 Water Leakage 38
1. 00 Ice (Blinking) 38
1. 0.0 Power Supply Voltage High 37 2. 01 Water Leakage 37
3. EE Service (Blinking) 38
1.00 Service Blinking – This indicates that the service is not available. It could be because of the following reasons: a. The power supply is faulty.
4. 00 Service (Not Blinking) 38
2.00 Service Not Available – This indicates that the requested service is not available. 3.00 Service Unavailable – This indicates that the request cannot be fulfilled.
5. 00 Service (Blinking) 38
1.00 Service Requested – This indicates that the user wants to initiate a service request. 2.00 Service Unavailable 3.00 Service unavailable 4.00 Service Not Blinking 38 5.00 Service Blinking38
1. -20
Error code -20 indicates that the refrigeration system is not working properly. It could be caused by any of the following reasons: a The compressor clutch is faulty. b The fan motor is defective.
US Based Sensor Company
1. -20 Error Code Indicates That The Refrigeration System Is Not Working Properly. It Could Be Caused By Any Of The Following Reasons: a The Compressor Clutch Is Faulty. b The Fan Motor Is Defective. US Based Sensor Co.
2. 55
3. -55 Error Code Indicates That A Problem Has Occurred In The Compressor Circuit Board. It May Cause Malfunctioning Of The Compressor And/Or The Fan Motor. This Error Can Also Be Due To Improper Installation Or Maintenance Of The Unit. 4. -60 Error Code Indicates That An Overload Situation Has Been Detected On The Compressor Circuit Board.It May Cause Malfunctioning Or Damage To The Compressor And/or The Fan Motor.
3. -88
1. 55 error code indicates that the compressor circuit board has been damaged. 2. 55 error code indicates a problem has occurred in the compressor circuit board.
4. Su
3. 1.55 error code indicates that the refrigerant gas has leaked into the system. 2. 55 Error Code indicates that the compressor circuit boards has been damaged.
Error Codes for Sub-Zero Refrigerator 700-2 Series
1.55 Error Code indicates that the refrigerant gaseous has leaked into the system. 2. 55 Error code indicates that the compressor circuit board has been damaged. 4. Su 3.1.55 Error Code indicate that the refrigerant gas have leaked into the system. 2.55 Error Code indicate the compressor circuit board has damage.
Why is my Sub Zero refrigerator beeping?
To reset the alarm on a sub zero refrigerator, you will need to press the button located on the back panel of the refrigerator. This will turn off the alarm and allow you to set the new time.
Why is my fridge continuously beeping?
If you hear a continuous beep from your refrigerator, it could mean that something is wrong with your appliance. It is important to check if the problem is caused by a loose wire or a short circuit. If you hear a constant beep, try unplugging the appliance and plugging it back in again. If the beeping continues, contact your local repairman.
How do you reset the alarm on a Sub-Zero refrigerator?
Your refrigerator is beeping because it needs to cool down. It is not something to worry about. Your fridge is working fine. Just let it cool down.
It's knowing what you're doing and having a good basic foundation.
That's why my mission is to teach you the fundamentals of great cooking...
So you can start creating delicious dishes without any rules or restrictions whatsoever.
With my step-by-step instructions, my unique insider secrets and techniques,
You'll be able to easily take ordinary food and make it extraordinary!
- How to Prolong the Life of Your Kitchen Appliances - December 22, 2024
- How Long does Yogurt Take to Freeze - May 5, 2023
- Top 10 best restaurants in Montana - May 1, 2023