Panasonic Fridge Freezer Not Freezing [Quick Fix]

1. Check the power supply. First, check whether the power cord is plugged into the wall socket correctly. Make sure that the plug is not damaged. Next, turn off the switch near the outlet. Then, connect the power cord again. If the issue persists, call Panasonic customer support. A technician can help you determine what needs to be repaired.

2. Check the compressor. To test the compressor, press the button located on the side of the unit. This will cause the compressor to stop running. Afterward, release the button. Now, place the palm of your hand over the area where the compressor is located. Do not cover the entire unit. You want to focus on one spot. Press down firmly. Hold the pressure for about 30 seconds. Release the pressure slowly. Repeat the process several times. If the compressor does not start up, contact Panasonic customer support. They can assist you in determining what needs to be fixed.

3. Clean the evaporator coil. Remove the door panel on the bottom of the refrigerator. Use a soft cloth to wipe away debris. Wipe around the coils. If necessary, use a vacuum cleaner to clean the coils. Replace the door panel.

4. Add water. Fill the dispenser with cold tap water. Let the water run out. Close the lid. Wait for 10 minutes. Open the lid and see if the temperature inside the refrigerator has changed. If it hasn’t, repeat step 5. If the temperature has decreased, add another cup of cold tap water. Wait for another 10 minutes. Repeat steps 4 and 5 if needed.

5. Unplug the refrigerator. Turn the power off. Disconnect the power cord. Plug the power cord back in. Leave the refrigerator unplugged overnight. In the morning, reconnect the power cord. Test the refrigerator again. If the temperature still isn’t changing, contact Panasonic customer support to schedule a repair appointment.

Check the Evaporator Fan Motor

The cold air you feel in your freezer comes from the oscillating movement of the evaporator fan inside the refrigerator. If the motor of the evaporator fan is defective, the fan will not circulate air over the cooling coils. As a consequence, there won’t be enough heat exchange and the temperature in the fridge will increase.

If the fan is working properly, you’ll notice that when you open the door of the fridge, the fan stops immediately. When you close the door, the fan starts working again. In case the fan doesn’t work correctly, you might hear some clicking noise coming from the compressor.

Clean the Evaporator Coils

The evaporator coils will be able to release cold air for fans to circulate in freezers if they don’t have a frost buildup on the coils.

Check the coils, which are normally behind the inside back panel of the freezer, to see whether there is a frost buildup. If there is, thawed out the frost using a hair drier or by manually defrosting the freezer. To defrost the freezer manually you must remove everything in it and unplug the unit for some hours. This will make all the ice melt and also take care of frost buildup on the evaporators.

Replace the Evaporator Fan Blade

A damaged blade could cause the fan to run continuously even if you turn off the power supply. To replace the blade, follow the instructions included in the manual of the appliance.

Check the Start Relay

The small start relay provides enough current to operate the compressor. However, without it, it is highly likely that the compressor will not run. This is because the start relay must provide enough current to energize the motor. A burnt smell may indicate that the relay is faulty. To check the continuity of the start relays, use a multimeter.

Test it between its run terminal and the start terminal. If there is no continuity, the relay needs replacing. Also, you can try testing the continuity of the start circuit. There are three parts to the start circuit: the starter solenoid, the ignition switch, and the start relay. You can test each part individually.

For example, you could test the continuity of the starter solenoid. To do this, disconnect the wire connecting the solenoid to the coil. Then, connect a multimeter across the terminals of the solenoid. If there is continuity, the solenoid is good. You can repeat the same procedure for the ignition switch and the start relay.

Check the Condenser Fan Motor

The condenser fan motor is one of the most important parts of the air conditioning system. This part helps to circulate the refrigerant gas inside the evaporator coil. When it stops working, your AC starts making strange noises and eventually fails.

Check the Temperature Control Thermostat

The temperature control thermostat controls the flow of electricity to the fan motor and the compressor. This device regulates the temperature inside the refrigerator. If the temperature control thermostats malfunction, you’ll notice that the refrigerator isn’t getting cold enough. You’ll also see a warning light illuminate.

If the temperature control thermostatic valve is defective, you’ll hear a clicking noise when you turn it from low to high. If there is no clicking noise, check the temperature control thermostatic valve for continuity.

You can use a multimeter to test continuity. Turn off the power switch, unplug the appliance, disconnect the fuse box, and then connect the multimeter leads to the terminals labeled “VCC.” Then, press the red button on the multimeter to read continuity. If there is continuity, the thermostat is working fine.

A Panasonic refrigerator was found with its freezer compartment stuck open. It had been running for about two weeks. When the homeowner turned off the power, the compressor stopped working. Thus, after a proper power supply, the unit started up normally.

This Panasonic refrigerator freezer has stopped working properly.
The ice maker won’t turn on and the temperature display explains 0 degrees Celsius.
What should I do?
Panasonic has been around since 1917 and is one of the largest appliance manufacturers in the world.
They also produce other household appliances such as washing machines, microwave ovens, air conditioners, etc.
You can try fixing the problem yourself or contact the manufacturer directly.
If you choose to fix it yourself, follow these steps: 1.
Remove the back panel from the fridge freezer

Panasonic Fridge Freezer Not Freezing – How to Fix

If you are having problems with your refrigerator not freezing properly, then you need to check if the freezer compartment is full. This could be caused by ice build up in the freezer. To fix this problem, you need to remove any ice from the freezer compartment. Once this is done, put the freezer back into operation. If this does not solve the issue, then you need to clean the coils of the freezer. Cleaning the coils will help to get rid of any bacteria that may be causing the problem. After cleaning the coils, you need to place the freezer back into operation again.

1. Check the Evaporator Fan Motor

Check the evaporator fan motor. It is located near the compressor. Make sure that it is working properly. If it is not working properly, then replace it. 2. Check the Compressor Answer: Check the compressor. It is located near to the evaporator fan motor and the condenser coil. Make sure that it works properly. If it is damaged, then replace it. If it is not damaged, then try to repair it.

2. Check the Condenser Coils

Check the condenser coils. It is located near from the compressor. Make sure it is working properly.If it is not working properly then replace it. 3. Check the Refrigerant Line Answer: Check the refrigerant line. It is located near compressor. Make sure that the refrigerant line is connected properly. If it is disconnected, then reconnect it.

3. Check the Evaporator Coils

Check the evaporator coils. It is located under the evaporator pan. Make sure it is functioning properly. If it is not working properly, then replace it. 4. Check the Compressor Motor Answer: Check the compressor motor. It is located near the condenser coil. Make sure it is running properly. If it is stopped, then restart it.

4. Check the Start Relay

Check the start relay. It is located near to the compressor motor. Make sure it is working properly. If it is malfunctioning, then replace it.

5. Check the Condenser Fan Motor

6. Check the condenser fan motor. It should be running smoothly. If not, check the wiring harness. 7. Check the fuse box. Make sure the fuses are good and the circuit breaker is off.

6. Check the Temperature Control Thermostat

1. Remove the bottom plate from the unit. 2. Turn the power switch OFF.

Why is refrigerator working but freezer not freezing?

If your freezer is getting cold but not freezing, it could mean that the ice maker is working properly, however, the door is not sealing correctly. This is usually caused by debris or dirt clogging the drain hole. To clean the drain hole, turn off the power switch, remove the back panel, and run warm water down the drain hole. Once the water runs clear, replace the back panel and turn the power switch back on. If the problem persists, contact a professional technician.

How do I reset my Panasonic fridge freezer?

Freezers are great tools for keeping food frozen longer. However, if you leave your freezer open for long periods of time, it could lead to condensation build up inside the freezer. This can damage the insulation around the walls and ceiling of the freezer. To prevent this from happening, you should clean the shelves and remove any items that are not needed. It is also important to maintain the temperature of the freezer. If the temperature fluctuates too much, the ice crystals that form inside the freezer will melt and drip down onto the floor. This can ruin the insulation and cause mold growth.

Why is my freezer not freezing fast?

Freezers are designed to freeze items quickly. However, if your freezer is not working properly, it could be because of several reasons. First, check the power supply. Make sure that it is plugged into a good outlet. Also, ensure that the freezer is turned off. If the freezer is still not working, try turning it back on and see if it works. If it does not, contact a professional repair service.

How do I make my freezer freeze faster?

Panasonic fridges have a tendency to get stuck in the “off” position. This is caused by a faulty switch or a loose connection. To reset the unit, simply press the power button until the display turns off. Then turn the unit back on again. Once the display comes back on, the unit should be ready to go.

Why is my freezer getting cold but not freezing?

Refrigerators and freezers are two different types of devices. Refrigerator works by using cold air while the freezer uses cold air and ice to freeze the items. So if the fridge is working properly, it means that the compressor is running and the fan is blowing cool air into the fridge. But if the freezer is not freezing, it means that the fan is not blowing any air into the freezer. It could mean that the compressor is not working or that the fan is not working. Check the power supply to the freezer and check whether the fan is turned on. Also check the wiring connections to the freezer.

Author
Recent Posts

Daisy

I'm Daisy Kim and I believe that the secret to great cooking is very simple --

It's knowing what you're doing and having a good basic foundation.

That's why my mission is to teach you the fundamentals of great cooking...

So you can start creating delicious dishes without any rules or restrictions whatsoever.

With my step-by-step instructions, my unique insider secrets and techniques,

You'll be able to easily take ordinary food and make it extraordinary!

Here are some ways to Quick fix the problem.