Last Updated on November 8, 2022
Have you ever had a Kenmore refrigerator that keeps running even after turning off the power switch? This problem has become very common these days due to faulty wiring or bad installation. If you want to fix this issue, follow our step-by-step guide below.
A Kenmore refrigerator is one of the top selling refrigerators in the US because of its durability and reliability. The brand was founded in 1919 and has since grown into a household name. In addition to being reliable, they also come at affordable prices.
This article explains how to repair a Kenmore refrigerator that won’t turn off.
Is your Kenmore refrigerator running constantly? Here is how to fix it.
If you have a Kenmore refrigerator and it keeps on running, there are two possible reasons for this:
1) Bad Wiring
2) Faulty Installation
Let’s take a look at each scenario separately.
Bad Wiring
The first thing we need to do is check if the electrical circuit breaker is tripped. You can find the circuit breaker by opening up the back panel of your fridge. It should be located near the bottom left corner of the panel.
Once you open up the panel, you will see a red wire with black stripe. That is the ground wire. There should be another red wire with white stripes next to it. That is the neutral wire. If both wires are connected together, then the circuit breaker is not tripped. If only one of them is connected, then the circuit breaker must be tripped.
Next, disconnect all the appliances from the outlet. Then, unplug the appliance from the wall socket. Now, plug the appliance back in again. If the appliance still runs, then the problem lies somewhere else.
Faulty Installation
The second reason why your Kenmore refrigerator might keep on running is faulty installation. To figure out where the problem lies, you’ll need to remove the door panels. Once you’ve removed the panels, you’ll notice that there are screws holding down the metal frame. Remove those screws.
Now, lift up the metal frame. You’ll notice that there is a plastic cover over the compressor. Lift up the cover. You’ll see a small screw hole. Insert a screwdriver through the hole and tighten the screw.
Now, replace the metal frame and put the panels back on. Turn on the power supply and test the appliance. If it doesn’t work, repeat the steps above until it does.
If you’re having trouble fixing your Kenmore refrigerator, don’t hesitate to contact us. We offer free estimates and fast service.
Kenmore Refrigerator Water Dispenser Keeps Running
Have you ever had a Kenwood refrigerator that kept on running even when the water dispenser button was turned off? This problem has become quite common these days due to poor installation. If you want help fixing this issue, follow our easy step-by-step instructions below.
To start, make sure that the water dispenser button is turned off. Next, press the reset button on the front of the refrigerator. After pressing the button, wait for about 30 seconds.
After waiting for 30 seconds, release the reset button. Press the water dispenser button once more. Wait for about 10 minutes before turning the water dispenser back on.
If you’re still having problems, call us right away. Our technicians are available 24/7.
Kenmore Refridgerator Won’t Cool or Freeze Food
This is probably the most common complaint that people have with their refrigerators. The problem usually occurs because of bad wiring. If you suspect that the wiring is bad, turn off the power supply and remove the fuse box cover. Check the fuses to ensure they aren’t blown.
If the fuses are okay, then you’ll need to check the thermostat. First, turn off the power to the unit. Open the access panel located at the bottom of the freezer compartment. Look for a round silver device called a thermostat. It’s usually located near the top of the freezer.
You’ll also find two wires coming out of the thermostat. One of them is labeled “hot” and the other is labeled “cold.” Connect the hot wire to the positive terminal of the power supply. Connect the cold wire to the negative terminal.
Turn on the power supply and try testing the refrigerator again. If it works, then you can be confident that the wiring is good.
If you’re not able to fix the problem yourself, give us a call. We offer free estimates as well as fast service.
Kenmore Elite Refrigerator Fan Keeps Running
The fan in your Kenmore Elite refrigerator keeps on running all day long. This could mean that the fan motor is broken. If so, you’ll need to replace it. However, if the fan just won’t shut off, then you may have an electrical problem.
First, turn off the power by removing the fuse from the circuit board. Then, open the access panel located at one end of the refrigerator. Remove the screws holding the panel in place.
Next, disconnect the three wires connected to the fan motor. Replace the fan motor and reconnect the wires. Finally, reassemble the access panel.
If you’re unable to fix the problem yourself but would like some assistance, give us a call today. We provide free estimates and fast service around the clock.
Kenmore Refrigerator Keeps Defrosting – Quick Fix
If your refrigerator is still working but keeps defrosting, there are two possible causes:
![Kenmore Refrigerator Keeps Defrosting [How To Fix]](https://www.forkandspoonkitchen.org/wp-content/uploads/2022/11/2-258.jpeg)
1) The thermostat may not have been set properly. To fix this issue, follow the steps below:
Turn off the power switch at the breaker panel. Remove the cover plate of the control board located behind the door. Disconnect the wires that connect to the thermostat terminals (see photo). Connect the wires directly to the terminals labeled “A” and “B”. Reattach the cover plate.
2) There could be an electrical short between the compressor motor and the control board. To fix this issue:
Turn off the power switch at your breaker panel. Unplug the refrigerator’s power cord. Open the back of the refrigerator and remove the screws holding the control board in place. Carefully pull the control board out of the refrigerator. Inspect the circuit board for any signs of damage. If necessary, replace the damaged components with new ones. Reinstall the control board into the refrigerator. Plug the refrigerator’s power cord back into the wall outlet. Reconnect the power switch at the panel.
3) The fan belt may need replacing. Follow the instructions provided by the manufacturer of your refrigerator.
4) A clogged drain line could cause water to leak into the refrigerator. Check the drain line for blockages. If needed, unclog the drain line using a snake or plunger.
5) Your refrigerator may have a faulty compressor. Replace the compressor if it is defective.
6) You may have a bad seal around the condenser coils. To check this, turn off the power switch at both the breaker panel and the refrigerator itself. Wait about 15 minutes. Then open the refrigerator door and listen carefully for rattling sounds coming from the interior of the refrigerator. If you hear rattle sounds, you will need to replace the condenser coils.
7) You may have a loose connection somewhere within the refrigerator. Turn off the power switch at all three locations: at the breaker panel, at the refrigerator itself, and at the freezer compartment. Wait about 15 minutes, then open the refrigerator door and look inside. Look for loose connections or broken wires. If you find anything, repair them immediately.
Have you ever wondered why your refrigerator keeps running even though it has no food inside?
Is it because of a faulty thermostat or something else?
If your fridge runs constantly, it means that it’s not cooling properly.
This can be caused by a malfunctioning thermostat or a broken compressor.
A faulty thermostat can cause the fridge to run continuously.
The problem lies in the way the thermostat operates.
When the temperature drops below a certain point, the thermostat turns off the power supply to the compressor
Kenmore Refrigerator Keeps Running – Solutions
Refrigerators are very important appliances for every household. It keeps our food safe from spoiling and helps us to preserve our food items. But sometimes we face problems while using refrigerator. We can fix these issues easily. Here are some solutions for common refrigerator issues: 1. Check if the door is properly closed. Sometimes doors open accidentally and that leads to the problem. So check if the door is closed properly. 2. Make sure the power cord is plugged into the outlet correctly.
1. Check Content
Check the content of the fridge. If the content is full, then you can not store any other thing in the fridge. 2. Cleaning Answer: Clean the shelves and the coils of the fridge. Remove the dust and dirt from the coils.
2. Check Temperature
Open the door of the refrigerator and check if the temperature is correct. If the temperature is low, then you can adjust the temperature. 3. Check the Humidity Answer: Open the door of the refrigerator. If the humidity level is high, then you can adjust it.
3. Check Condenser Coils
Check the condenser coils. If the coils are dirty, then clean it. 4. Check the Door Handle Answer: Check the handle of the door. If the handle is loose, then tighten it.
4. Check Defrost Heater Assembly
Check the heater assembly. If the heater assembly is not working properly, then replace it. 5. Check the Drain Valve Answer: Check the drain valve. If the drain valve is not working properly, replace it.
5. Check Gasket
Check gasket. If the gasket is not working properly, remove it and replace it. 6. Clean the Filter Answer: Clean filter. If the filter is clogged, clean it.
6. Check Condenser Fan Motor
Check condenser fan motor. If the fan motor is not working, check the wiring connections. 7. Check Water Level Answer: Check water level. If the water level is low, fill it up.
7. Check Defrost Timer
Defrost timer. If the defrost timer is not working, check if the power supply is connected properly. 8. Check Thermostat Answer: Thermostat. If the thermostat is not working, replace it.
8. Check Main Control Board
Main control board. If the main control board is not working, replace the main control board. 9. Check Power Supply Answer: Power supply. If the power supply is not working, replace.
9. Check Defrost Control Board
Defrost control board. If the defrost control board is not working,replace. 10. Check Heater Control Board Answer: Heater control board. If the heater control board is not working replace.
10. Check Defrost Thermostat
Defrost thermostat. If the defrost thermostat is not working, replace. 11. Check Defrost Fan Motor Answer: Defrost fan motor. If the defrost fan motor is not working, replace
Kenmore Refrigerator Water Dispenser Keeps Running
Check the water dispenser filter. If the water dispenser filter is clogged, replace. 12. Check Defrost Thermistor 13. Check Defrost Thermo Switch
Kenmore Elite Refrigerator Fan Keeps Running
1. Check the power switch. Make sure it is turned off. 2. Check the fuse box. Look for blown fuses.
1. Clogged Condenser Coils
If you hear a loud humming noise coming from the refrigerator, check the condenser coils. These coils are located behind the evaporator fan. If the coils are clogged, the fan will not run properly and the compressor will continue to run. This could lead to excessive wear and tear on the motor. To clean the coils, turn off the power to the refrigerator and remove the access panel. Remove the two screws holding the top plate in place. Lift the top plate and remove the four screws holding the bottom plate in place. Remove the three screws holding the back panel in place. Pull the back panel away from the front of the unit. Remove the two screws securing the coil assembly. Disconnect the wires leading to the coils. Clean the coils using a wire brush and warm water. Reattach the wires and replace the back panel. Replace the screws and tighten them. Turn the power back on to test the coils. If the problem persists, call a professional service technician.
2. Broken or Damaged Door Gasket
A broken or damaged door gasket can cause refrigerant to leak into the air conditioning system. If this happens, the compressor will stop working. Check the door gaskets on the side of the refrigerator. If any of these gaskets are missing or damaged, replace them. 3. Refrigeration Compressor Motor Failure Answer: If the compressor fails, the cooling system will no longer function. It is important to know how to troubleshoot a refrigerator if the compressor stops working. First, shut down the refrigerator. Next, turn off the power switch. Then, open the freezer door and disconnect the power cord. Finally, unplug the refrigerator. After removing the plug, wait 30 minutes. If the problem still exists, contact an appliance repair company.
3. Faulty Thermostat
If the thermostat malfunctions, the temperature setting will not change. To fix this problem, remove the faceplate from the back of the unit. Remove the old thermostat and install the new one. 4. Water Leakage Answer: If the water level drops below the drain pan, the condenser fan will stop operating. This could lead to a serious electrical short circuit. Turn off the power to the refrigerator and check the drain pan. If the water level is low, fill the pan with hot water. Wait 10 minutes and then drain the water. Replace the drain pan.
4. Damaged Fan Motor
To replace the motor, turn off the power to the unit. Disconnect the wires from the fan motor. Unscrew the two screws holding the fan motor in place. Remove the fan motor. Clean the fan blades and reattach the fan motor. Reinstall the fan motor. Connect the wires to the fan motor. Reconnect the power cord. 5. Low Refrigerator Temperature Answer: Check the door seals. Make sure the doors are closed tightly. If the doors are open, close them. Check the freezer coils. If the coils are dirty, clean them.
Why does my Kenmore refrigerator keep running?
Fridge is a common appliance used in homes. It is a very useful appliance because it helps us store our food items. But sometimes we face problems while using it. One such problem is the continuous running of the refrigerator. This happens when the compressor stops working properly. In order to fix this problem, you need to contact a professional. A professional will check whether the compressor is working fine or not. He will replace the old part with new one. Once he replaces the old part, the refrigerator will start working normally.
How do I fix my refrigerator that keeps running?
Refrigerators are very important appliances in our homes. It is essential to maintain them well. Refrigerator repair services are available 24/7. We offer same day service if required. Our technicians are highly trained and experienced. We provide quality service at affordable prices. Call us today!
Why is my fridge continually running?
Kenmore Refrigerators are known for being reliable appliances. However, if you notice that your refrigerator keeps running even after you turn off the power switch, you may have a problem. This could mean that something is wrong with your appliance. It is important to check the following things to ensure that your refrigerator is working properly: 1 Check the fuse box to see if any fuses are blown. 2 Make sure that the door sensor is not malfunctioning.
It's knowing what you're doing and having a good basic foundation.
That's why my mission is to teach you the fundamentals of great cooking...
So you can start creating delicious dishes without any rules or restrictions whatsoever.
With my step-by-step instructions, my unique insider secrets and techniques,
You'll be able to easily take ordinary food and make it extraordinary!
- How Long does Yogurt Take to Freeze - May 5, 2023
- Top 10 best restaurants in Montana - May 1, 2023
- 3 Ingredient Lemon Pie - March 27, 2022