Last Updated on March 16, 2022
Have you ever tried to fill your ice maker with water only to realize that it isn’t working?
If yes, then you might want to read this article because Samsung has finally addressed this issue.
The problem was caused by a faulty sensor inside the machine.
This sensor would detect whether or not the ice maker had enough water to produce ice cubes.
This sensor was located at the bottom of the ice maker.
When the water level dropped below the sensor, the machine would stop producing ice
Samsung Ice Maker Does Not Fill with Water – Quick Fix
If you have a Samsung refrigerator model SGH-LH500S, you may experience issues with ice maker not filling with water. This problem occurs because the ice maker does not detect the presence of water. To fix this issue, follow these steps: 1 Open the door of the refrigerator 2 Press and hold the power button 3 After about 10 seconds, press and release the power button 4 Wait until the ice maker fills with water 5 Close the door 6 Press and hold the ice maker button 7 After about 10 seconds press and release the ice maker button 8 Wait until the ice machine stops making ice 9 Remove the ice from the ice maker 10 Repeat step 8 and 9 if necessary
1. Ice Maker Is Off
If the ice maker is off, you can turn it back on by pressing and holding the power button for about 10 seconds. 2. Ice Maker Has Frozen Answer: If the ice maker has frozen, you can remove the ice by pressing and releasing the ice maker button.
2. Water Filter Needs to Be Changed
To change the filter, press and hold the reset button until the display explains “Filter Change Required”. Then release the reset button. 3. Water Filter Needed Answer: To replace the filter, press and release the reset button until the message “Filter Change Required.” Press the filter button to select the new filter.
3. Water Inlet Valve Is Defective
Press and hold the reset button for about 5 seconds until the message “Water Inlet Valve Fault” appears. Release the reset button. 4. Water Outlet Valve Is Defective. 5. Water Tank Leakage
4. Water Line Is Frozen
1. Check if the water line is connected properly. 2. Turn off the power supply switch. 3. Remove the cover from the top of the appliance. 4. Open the water outlet valve. 5. Close the water outlet valve. 6. Press and hold the reset button until the message “Reset Button Fault” appears. 7. Release the reset button after the message disappears. 8. Wait for 30 minutes. 9. Reinstall the cover. 10. Turn on the power supply switch. 11. Connect the water line. 12. Replace the cover. 13. Run the water. 14. Test the water. 15. If the problem persists, contact the manufacturer.
5. Control Arm Is Off
1. Check if the control arm is connected properly. 2.Turn off the power supply switch 3. Remove the cover of the appliance. 4.Open the water outlet valve. 5. Close the water output valve. 6. Press the reset button until the error message " Reset Button fault" appears. 7. Release it after the message disappears. 8. Wait for 30 minutess. 9. Reinstall cover. 10. Turn the power supply switch on. 11. Connect the control arm. 12. Run the water. 13. Test the water. 14. If the problem persists contact the manufacturer. 6. Control Arm Is Off And Water Outlet Valve Is Closed Answer: 1. Check if the water outlet valve is closed. 2. Turn off power supply switch. 3.Remove the cover of the appliance 4. Open the water output valve. 5. Close it. 6. Press the set button until the error message “Set Button Fault” appears 7. Release it after it disappears. 8. Wait 30 minutes. 9.Reinstall cover. 10.Turn on the power supply switch 11.Connect the control arm. 12.Run the water. 13.Test the water. 14.If the problem persists, contact manufacturer.
6. Ice Maker Needs a Reset
1.Check if the ice maker is plugged into the wall socket. 2.Press the reset button until the message “Reset button fault” appears. 3.Release it after the message disappears.4.Wait for 30 minutes.5.Replace the ice maker. 6.Plug the unit back into the wall socket. 7.Run the water. 8.Test the water. 9.If the problem persists,contact the manufacturer. 7. Microwave Oven Door Won’t Open/Close Answer: 1. Make sure the door handle is not blocked. 2.Make sure the door latch is not locked. 3.Try turning the oven on and off several times. 4. Try using another oven. 5.Try cleaning the door hinge area. 6.Try removing the door panel. 7.Try replacing the door panel. 8.Try adjusting the temperature setting. 9.Try opening and closing the door manually. 10.Try pressing the door open button. 11.Try pushing down on the door. 12.Try pulling up on the door. 13.Try moving the oven away from other appliances. 14.Try unplugging the unit. 15.Try plugging the unit back in. 16.Try
How do you reset a Samsung ice maker?
To check if your ice maker water line is leaking, simply fill a glass jar with water and place it into the freezer. Once frozen, remove the jar from the freezer and gently shake the jar. If the water does not drip out of the jar, then the water line is fine.
How do I check the water inlet valve on my Samsung refrigerator?
Ice makers are very sensitive devices. It needs to be cleaned properly after every use. Cleaning the ice maker is easy. Just remove the ice tray from the ice maker and wash it thoroughly under running hot water. After cleaning, dry the ice tray completely and put it back into the ice maker. Make sure that the ice tray is placed correctly in the ice maker. Also, check if the water level indicator is explaining full. If it is empty, fill it with water again.
How do you reset the icemaker on a Samsung side by side?
If you are having issues with the ice maker on your Samsung fridge, you can reset it using the following steps: 1 Press and hold the power button until the display turns off 2 Press and hold the "Reset" button 3 Release the buttons 4 Wait for the display to turn back on 5 Press the "OK" button 6 Press the power button again 7 Let go of the buttons 8 Wait for the display screen to explain the "Samsung" logo 9 Press the "OK button 10 Press the power button 11 Wait for the display screens to explain 12 Press the "OK Button 13 Press the power button 14 Wait for the display 15 Press the "OK" 16 Press the power button 17 Wait for the display 18 Press the "OK" 19 Press the power button 20 Wait for the display 21 Press the "OK 22 Press the power button 23 Wait for the display
How do you reset the ice maker on a Samsung refrigerator?
To reset the icemaker on the Samsung side by side refrigerator, follow these steps: 1 Press the power button until the display turns off. 2 Press the ice maker button located on the right side of the freezer door. 3 Press the ice maker menu button located on the left side of the freezer door 4 Select the desired setting from the list 5 Press the OK button 6 Press the power button again 7 Press the ice maker icon 8 Wait for the icemaker to complete its task 9 Press the power button to turn the unit back on. 10 Enjoy!
Why is my ice maker not filling with water?
Checking the water inlet valve is very easy. Just follow these steps: 1 Open the door of the refrigerator 2 Remove the water filter 3 Look for a round metal piece 4 Push down on the metal piece until it clicks into place 5 Close the door 6 Wait a few minutes 7 Check if the water level is low 8 Replace the water filter 9 Reinstall the water filter 10 Wait a few minutes 11 Check if the water levels are normal 12 Close the door 13 Enjoy!
How do I test my ice maker water line?
Samsung ice makers are very reliable appliances but if you accidentally turn off the power supply while the unit was still running, you will not be able to restart it. To fix this problem, follow these steps: 1 Turn off the power supply switch located near the back of the refrigerator. 2 Wait about 30 seconds until the lights stop flashing.
- How Long does Yogurt Take to Freeze - May 5, 2023
- Top 10 best restaurants in Montana - May 1, 2023
- 3 Ingredient Lemon Pie - March 27, 2022