Kenmore Refrigerator Keeps Shutting Off [How to Fix]?

Last Updated on November 8, 2022

Have you ever experienced your Kenmore refrigerator shutting off unexpectedly? If so, you probably didn’t realize that this was a common problem with these appliances. So before you call out the repairman, check out our guide below to see whether or not your Kenmore fridge is malfunctioning.

In fact, Kenmore refrigerators are some of the most reliable models on the market. The company has been around since 1921 and its reputation for quality and reliability is unmatched.

But even though they last longer and perform better than other brands, Kenmore refrigerators aren’t without their quirks. Some owners report problems such as the freezer not cooling down properly, the door opening itself randomly, and the compressor failing.

Kenmore refrigerator keeps shutting off – what to do?

Most likely the problem is in the circuit board itself, but it could be something else. It will take someone who knows how to troubleshoot these kinds of issues to figure it out. Try taking apart the unit and looking around for anything loose or damaged. Check the fuses (if any) for evidence of arcing and continuity. Also check the battery terminals for corrosion. Make sure they are clean and not cracked. A dead fuse can be replaced easily; if a corroded terminal needs replacement, you might have to get a new power cord. Check the voltage on the power supply from the wall outlet if possible. Look for signs of overheating such as melted plastic or scorched wires. Is the door open or closed? Are any doors or drawers open? Check the freezer thermometer for accuracy.

How to turn off water to a Kenmore refrigerator?

To prevent damage from leaks, shut the system down completely (leaving the door open) and unplug the unit. Unplug the drain plug located near the back of the unit. Wait approximately five minutes and plug the drain plug again. Run cold water until the faucet stops dripping. Plug the unit back into power.

Kenmore refrigerator turning off and on – quick fix

The problem occurs because the compressor turns off when the door of the freezer opens. This happens on purpose so the ice maker won’t melt during operation. To avoid any inconvenience, turn the power switch OFF and back ON again. If the problem continues, contact your service provider for further assistance.

Is there a reset button on a Kenmore refrigerator?

Many refrigerators these days feature a “reset” function that allows users to delete any information stored on the appliance’s memory chip, including personal data such as name, phone numbers, addresses, photos, and other important documents. This helps prevent hackers from gaining access to your private information, but the process requires a special key — a 4-digit code known as a “Reset Key Code.” To get started, press and hold the power switch until the unit shuts off, then wait about 10 seconds while it turns back on again. After the display goes blank, enter the Reset Key Code (which is located near the bottom left corner of the LCD screen) into the keypad (see image below). As soon as you hear the tone, release the power switch. Once the fridge door opens, remove the batteries and place them in the original box (keep it safe in case you need to call a repair service if needed later).

What is the first thing to check when a refrigerator stops working?

Refrigerators stop working for many reasons. One of the common problems is the compressor. It is located near the back bottom of the fridge. To repair it, turn off the power supply to the unit. Then open the door and remove the screws holding the compressor to the cabinet. Remove the compressor from the unit. Check the wires attached to the compressor. If any of them are loose, tighten them using wire nuts. Replace the compressor into the unit and screw the screws. Turn on the power again and test if it works now.

Why did my Kenmore refrigerator stop working?

Kenmore refrigerators are designed to be used with the ice maker and icemaker. Ice makers and ice makers are usually built into the door of the freezer compartment rather than being attached directly inline with the appliance. To save energy during operation, only the compressor runs while the ice/water dispensing mechanism operates off of electricity provided from the power source. Therefore, if the electric cord fails, the dispensing mechanism will not operate until the unit warms back up. After about 10 minutes, the compressor kicks back on to resume operations. This process creates ice within the storage bin where the ice maker resides. The same applies to a refrigerator that no longer dispenses ice after the unit was previously turned off. It could mean a couple of things. First, the ice maker does not produce ice. A second possibility is that the motor that pushes a lever and releases the ice cannot operate because ice has accumulated around the lever. These levers are located on top of the door panel. Next, check to see if the ice dispenser has been removed from the outside of the cabinet.

Your Kenmore refrigerator keeps shutting off unexpectedly.
Is it time to replace it?
If your fridge has stopped working properly, it might be time to get a new model.
The problem could be caused by a number of things, from a faulty sensor to a bad connection between the power supply and the compressor.
Here are some common problems that can cause your fridge to shut down, and how to fix them

Kenmore Refrigerator Keeps Shutting Off – What to Do

If your refrigerator keeps shutting off, it could mean that the compressor is not working properly. This is usually caused by a loose connection between the motor and the fan. To fix this problem, follow these steps: 1 Turn off the power switch 2 Remove the back panel 3 Disconnect the wires from the fan 4 Unplug the unit 5 Check the connections 6 Replace the back panel 7 Plug the unit back in 8 Turn on the power switch 9 Wait for the unit to cool down 10 Reattach the wires to the fan 11 Reconnect the unit 12 Turn on the power 13 Wait for the unit cool down 14 Replace the back panel 15 Plug the unit back into the wall 16 Turn on the power 17 Wait for the unit cooling down 18 Reattach the wires 19 Reconnect the unit 20 Turn on the power 21 Wait for the unit cooler down 22 Replace the back panel 23 Plug the unit back to the wall 24 Turn on the power 25 Wait for the unit cooled down 26 Reattach the wires 27 Reconnect the unit 28 Turn on the power 29 Wait for the unit’s cooling down 30 Replace the back panel 31 Plug the unit back onto the wall 32 Turn on the power 33 Wait for the unit’s cooling down 34 Reattach the wires 35 Reconnect the unit 36 Turn on the power 37 Wait for the unit’ cooling down 38 Replace the back panel 39 Plug the unit back on the wall 40 Turn on the power 41 Wait for the unit

1. Check the Evaporator Coils

Check the evaporator coils for any blockage. If the coils are clogged, the condenser coil may become damaged. In this case, the air conditioner should be taken apart and cleaned. A clogged evaporator coil will cause the air conditioner to run continuously. 2. Check the Compressor Motor Answer: Check if the compressor motor is running smoothly. If it is not running smoothly, it may be due to a bad belt. The belt should be replaced.

2. Check the Defrost Timer

If the defrost timer is set incorrectly, the unit may freeze up. To correct this problem, turn off the power supply to the unit and remove the ice from the defrost timer. Then reset the timer to the desired setting. 3. Check the Thermostat Answer: Make sure the thermostat is working properly. If the thermostat is defective, the unit may get stuck in the heating mode. This could lead to overheating.

3. Check the Cold Control Thermostat

Check the cold control thermistor if it is not working properly. It may be damaged. 4. Check the Power Supply Answer: Make sure the power cord is plugged into the wall socket correctly.

Kenmore Refrigerator Not Shutting Off – Solutions

If you hear a loud noise coming from the refrigerator, check the door seals. If the seals are loose, tighten them using the supplied tools. Be careful not to over tighten the seals. Kenmore Refridge Door Won’t Close – Solutions Answer: Make sure the door latch is fully engaged. If it is not, try pushing down on the handle to engage the latch. If that does not work, remove the door panel and see if the door latch is stuck.

1. Defrost System

Defrosting is done automatically after the freezer reaches 0 degrees Fahrenheit. To defrost manually, turn off the power switch and wait until the unit warms up to 40 degrees F. Remove the ice tray and place it outside. Wait until the ice melts completely. Replace the ice tray and continue to monitor the temperature. Once the temperature reaches 0 degrees F, the defrost system will begin again. 2. Freezer Light Answer: Check the light bulb for any damage. If the bulb is burned out, replace it. Make sure the light fixture is plugged into a working outlet.

2. Condenser Coils

If the coils are dirty, clean them using a damp cloth. 3. Door Handle Answer: Check if the door handle is loose or broken. Tighten the screws if necessary.

3. Door Seal

Check if the door seal is damaged or not working properly. Replace the door seal if necessary. 4. Water Filter Answer: Clean the filter using a soft brush.

4. Temperature Setting

Adjust the temperature setting according to the type of rice. 5. Rice Cooker Cover Answer: Check whether the cover is loose or not. Tighten the cover if needed.

5. Evaporator Fan

Check whether the fan is working properly. 6. Water Level Answer: Make sure the water level is enough.

6. Condenser Fan

Make sure the condensation fan is working properly. 7. Drain Line Answer: Check if the drain line is clogged. 8. Drain Valve Answer: Check if it is leaking. 9. Oil Filter

How to Turn Off Water to a Kenmore Refrigerator

To turn off the water to a refrigerator, follow these steps: 1. Open the door of the refrigerator 2. Find the water supply valve 3. Turn the valve clockwise until it stops 4. Close the door 5. Wait 10 minutes 6. Repeat step 4 7. Close the door 8. Wait 30 minutes 9. Repeat step 4 10. Close the door 11. Wait 24 hours 12. Repeat step 4 13. Close the door 14. Wait 48 hours 15. Repeat step 4 16. Close the door 17. Wait 72 hours 18. Repeat step 4 19. Close the door 20. Wait 96 hours 21. Repeat step 4 22. Close the door 23. Wait 120 hours 24. Repeat step 4 25. Close the door 26. Wait 168 hours 27. Repeat step 4 28. Close the door 29. Wait 240 hours 30. Repeat step 4 31. Close the door 32. Wait 336 hours 33. Repeat step 4 34. Close the door

Kenmore Refrigerator Turning Off and On – Quick Fix

1. Open the door of refrigerator 2. Find the drain valve 3. Turn the drain valve clockwise until it stop 4. Close the door

Why did my Kenmore refrigerator stop working?

There is no reset button on a Kenwood refrigerator. However, if you press the power button on the front panel of the fridge, it will turn off. Then, you can restart the unit by pressing the power button again.

What is the first thing to check when a refrigerator stops working?

Refrigerators stop working for various reasons. One of the most common problems is a power outage. Check the fuse box and unplug any appliances that aren’t being used. This includes computers, TVs, stereos, and other devices. Next, turn off the breaker switch for the circuit where the fridge is plugged into. If the problem persists, call a professional repair service.

Is there a reset button on a Kenmore refrigerator?

Refrigerators are not only used for keeping food cold but also for keeping food safe from bacteria growth. Refrigerator failure can occur because of many reasons such as malfunctioning compressor, bad wiring, faulty electrical components, poor insulation, improper maintenance, and even a power surge. It is important to check the following items before calling a repair service technician: 1 Check if the door seals are properly installed. 2 Make sure the freezer coils are clean.

Daisy
Latest posts by Daisy (see all)

Leave a Comment